10 August, 2001 TRAY HEATER
3-49
3.17 TRAY HEATER
!
CAUTION
Unplug the machine power cord before starting the following procedure.
1. Remove the connector cover [A] and rear cover [B] (4 screws).
2. Slide out the 1st and 2nd paper trays.
3. Pass the connector [C] through the opening [D].
4. Install the tray heater assembly [E] (1 screw).
B027I510.WMF
B027I502.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
