ENERGY SAVER MODES 10 August, 2001
2-68
2.11 ENERGY SAVER MODES
2.11.1 OVERVIEW
When the machine is not being used, the energy saver function reduces power
consumption by decreasing the fusing temperature.
This machine has two types of energy saver mode as follows.
1) Energy saver mode
2) Auto Off mode
These modes are controlled by the following UP and SP modes.
• Panel off timer (energy saver mode timer) : User Tools – System Settings –
Timer Setting – Panel Off Timer
• Auto off timer: User Tools – System Settings – Timer Setting – Auto Off
Timer
• Auto off disabling (SP mode): Set SP 5-305 to 1. This allows the user to
disable auto off mode by setting the auto off timer to 0.
Stand-by Mode
Energy Saver Mode
(Low Power Mode)
Auto Off Mode
Off Stand-by
Mode
Off Mode
FAX: RX, etc.
Printer Data in
After Printing
Energy Saver Key On
Return Time Less than 3 s
Operation Sw. Off
-or-
Auto Off Timer
(10 s to 4 hrs / Default: 60 s)
Operation Sw. On
Platen Cover Open/Close
Original Set ADF
Return Time Less Than
10 s
Operation Sw. Off
-or-
Auto Off Timer
(10 s to 4 hrs / Default: 60 s)
Energy Saver Key On
-or-
Panel Off Timer
(10 s to 4 hrs / Default: 60 s)
B027D503.WMF
To Next Page
Loading...
