Using the Printer Function
50
5
Standard TCP/IP Port
A Click [Standard TCP/IP], and then
click [New Port].
B In the [Add Standard TCP/IP Print-
er Port Wizard] dialog box, click
[Next].
C In the [Printer Name or IP Address]
box, enter the printer name or
IP address, and then click
[Next].
D In the [Add Standard TCP/IP Print-
er Port Wizard] dialog box, click
[Finish].
LPR Port
A Click [LPR Port], and then click
[New Port].
B In the [Name or address of server
providing lpd] box, enter the
printer's IP address.
C In the [Name of printer or print
queue on that server] box, enter
“lp”, and then click [OK].
C
CC
C
Click [OK].
D
DD
D
Check the location for the select-
ed printer, and click [Close].
To Next Page
Loading...
