Ricoh Aficio 1515 - Setting up as a Remote Printer

Printing with NetWare
57
5
Note
❒ As context, object names are
entered in lower object order
and divided by a period. For
example, if you want to cre-
ate a print server into NET
under d, enter “d”.
F In the [Print Server Operation
Mode] area, click [As Print Serv-
er].
G Click [OK] to close the [NIB Set-
up Tool - Network board list] dialog
box.
I
II
I
Quit SmartDeviceMonitor for Ad-
min.
After this step, operate the ma-
chine by following the procedure
from step
I
on p.59 “NetWare 4.x,
5/5.1, 6”. However, steps
N
-C and
N
-D are not required.
Setting Up as a Remote Printer
NetWare 3.x
A
AA
A
Log on to the file server as an ad-
ministrator, or equivalent.
B
BB
B
Start SmartDeviceMonitor for Ad-
min
.
C
CC
C
On the [Group] menu, point to
[Search Device], and then click
[IPX/SPX].
A list of machines appears.
D
DD
D
In the list, select the printer for
which you want to change config-
uration.
E
EE
E
On the [Tools] menu, click [NIB Set-
up Tool].
NIB Setup Tool starts.
F
FF
F
Click [Property Sheet], and then
click [OK].
The [NIB Setup Tool - Network board
list] dialog box appears.
G
GG
G
Click the [NetWare] tab, and then
make the following settings:
A In the [Print Server Name:] box,
enter the name of the print
server.
Limitation
❒ Enter up to 47 alphanumeric
characters.
B In the [File Server Name:] box, en-
ter the name of the file server
in which a print server is to be
created.
By clicking [Browse…], you can
select a file server among those
listed in the [Browse…] dialog
box.
Limitation
❒ Enter up to 47 alphanumeric
characters.
C In the [Print Server Operation
Mode] area, click [As Remote
Printer].
D In the [Remote Printer No.] box,
enter the printer number.
Important
❒ Use the same printer number
as that to be created in the
print server.
E Click [OK] to close the [NIB Set-
up Tool - Network board list] dialog
box.
H
HH
H
Quit SmartDeviceMonitor for Ad-
min.