Ricoh Aficio 1515 - Configuring the Network Interface Board

Understanding Displayed Information
109
9
❖
❖❖
❖ *4 Output Tray: Name
❖
❖❖
❖ *5 Output Tray: Status
Configuring the Network Interface Board
The network interface board settings can be displayed using the commands be-
low.
• telnet : Use the “show” command. See p.87 “Network interface board config-
uration settings information”.
Name Description
Internal Tray Internal tray
Status Description
Normal ----
Error Other error
Item name Meaning
Common
Mode
Protocol Up/Down “Up” means active; “Down” means inactive.
AppleTalk
TCP/IP
NetWare
SMB
IP over 1394
*1
SCSI print
*1
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location Internal version number
Contact
Soft switch Internal version number