Ricoh Aficio 220 - Page 54

Copying
40
2
When setting an original on the
exposure glass or in the
document feeder
A Set the original, then press the
{
Start
}
key.
B Set the next original, then
press the
{
Start
}
key.
Note
❒
Set the original in the same
direction as the first one.
C After all originals are scanned,
press the
{
#
}
key.
The copies are delivered to the
tray.
To stop scanning
When you are using the Sort, Stack, or
Staple function, the originals are
scanned into memory.
A Press the
{
Clear/Stop
}
key.
To resume scanning
A Press the
{
Start
}
key.
Scanning is resumed.
Note
❒
Scanned images in memory
are not cleared.
To clear all scanned images
A Press the
{
Clear Modes
}
key.
Scanning is stopped and the set-
tings are cleared.
When memory reaches 0%
Scanning will be stopped if the size of
scanned image data exceeds memory
capacity.
Note
❒
The number of originals that can
be stored in memory varies de-
pending on the memory setting
and original type.
❒
The maximum number of originals
that can be stored is about 100 pag-
es.
Reference
For details, see “08. Print Quality”
and “09. Image Adjustment” in
⇒
P.117
“1. General Features
2
/
4
”
To copy scanned so far originals
A Press the
[
Print
]
key.
The scanned pages are delivered to
the tray then the image data in
memory is cleared.
B Remove the copies and continue
copying by following the instruc-
tions on the display.
To cancel the copy operation
A Press the
[
Clear
]
key.
Scanning is stopped and the set-
tings are cleared.