Changing the Paper Size
133
6
Note
❒ Fan the paper before loading.
❒ Straighten curled or warped pa-
per before loading.
G While pressing the release lever,
adjust the side guides to the new
paper size.
Important
❒ When loading small quantities
of paper, be careful not to
squeeze the side guide in too
tightly, as the paper will not
feed properly.
H Lock the side lever.
I While pressing the release lever,
adjust the back guide to the new
paper size.
J Adjust the paper size selector to
the new paper size.
To adjust the paper size to a size
not indicated on the paper size
selector
A Set the paper size selector to
the p mark.
B
Press the
{
User Tools/Counter
}
key.
C Press [System Settings].
D Press [Tray Paper Settings].
E Press [Tray Paper Size: Tray 1],
[Tray Paper Size: Tray 2], [Tray Pa-
per Size: Tray 3] or [Tray Paper
Size: Tray 4].
F Select the required size, and
then press [OK].
G
Press
[
Exit
]
or the
{
User Tools/Coun-
ter
}
key to exit User Tools.
ZEWY190E
ZEWY200E
ZEWY210E
ZEWY220E
To Next Page
Loading...
