126
Maintaining
Cleaning
Clean the outside of the printer regularly to maintain the condition of the printer.
To clean the exterior of the printer, wipe it with a soft, dry or damp cloth. If the dirt does not come off, wipe the
printer first with a cloth moistened with a neutral detergent, then with a damp cloth, and finally with a dry cloth.
z
Do not use volatile chemicals like benzene or thinner, or insecticides on the printer. Using these chemicals could deform, crack, or change the
colour of the printer.
z
When wiping the printer with a cloth moistened with detergent, be sure to wipe only the exterior.
z
To avoid hazardous electric shock, do not remove any covers or screws other than those specified in this
manual. When the machine needs to be checked, adjusted, or repaired, contact your service representa-
tive.
z
Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock,
explosion or loss of sight.
To Next Page
Loading...
