64
Making Printer Settings
Density
You can adjust the density of the printing colour.
z
Light
z
Standard
z
Dark
Default: Standard
Ink CU Replace
You can reset the ink storage counter when replacing the ink collector unit.
Changing the System Menu
This section gives an example of changing a setting in the System menu.
1. Press the [Menu] key.
2. Press [ ] or [ ] key to display [System], and then press the [#Enter] key.
3. Press [ ] or [ ] key to display [Energy Saver], and then press the [#Enter] key.
4. Press the [ ] or [ ] key to display [E.Saver Timer], and then enter [#Enter] Key
5. Press [ ] or [ ] key to select the lead time needed to switch to the Energy Saver mode.
6. Press the [#Enter] key.
The [System] screen appears.
Menu:
System
System:
Energy Saver
Energy Saver:
E.Saver Timer
E.Saver Timer:
*15 minutes
To Next Page
Loading...
