75
Making Printer Settings
Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking
the test pattern printed.
To check the printed test pattern, proceed to step 8
.
1. Open the printer properties dialog box.
2. Click the [Maintenance] tab.
3. Click [Registration].
4. In the [Paper source tray:] list, select a paper tray. In the [Paper type:] list, select a paper type.
5. Click [Next >].
6. Check that A4/Letter size paper is loaded in the paper tray.
7. Click [Next >].
A test pattern to adjust the print start position is printed.
Do not perform other operations during printing.
8. Check the optimal adjustment values on the printed test pattern.
9. Fold the test pattern sheet in half lengthwise.
To Next Page
Loading...
