Registering SMTP and LDAP Authentication
253
7
Q Press the {OK} key.
R Press the {User Tools/Counter} key.
Note
❒ To register the name, see Registering Names".
❒ You can enter up to 191 characters for the user name.
❒ When using POP before SMTP Authentication, you can enter up to 63 al-
phanumeric characters.
❒ You can enter up to 64 characters for the password.
❒ To change the SMTP Authentication settings, repeat step
B
to
P
.
Reference
p.140 “Registering Names”
p.15 “Network Settings”
"Entering Text", About This Machine
LDAP authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand.
Important
❒ When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program/Change LDAP Server of
Administrator Tools settings applies. For details about LDAP authentication,
consult your administrator.
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
To Next Page
Loading...
