List of the Setting Items
139
5
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
*1
Items that are displayed might vary depending on which options are installed.
Settings Selectable Items
Collate: Off, On
Dithering: Auto, User Setting, Text, Photographic
Duplex: Off, Open to Left, Open to Top
Fit to Print Size: Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing: Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than 300 ppi
Input Tray: AutoSelect Tray, Bypass Tray, Tray 1, Tray 2, Tray 3, Tray 4
Output Tray:
*1
Internal Tray, Printer Default
Orientation: Portrait, Landscape, Rotated, Orientation Override
Resolution 600 dpi
Size: See General Settings Guide.
Staple: Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top
Edge Smoothing Off, On
Toner Saving Off, On
Type: See General Setting Guide.
Paper Selection: Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Punch Unit: Off, 2 holes, 3 holes, 4 holes, 4 holes type NE, 2 holes type EU,
4 holes type EU, 2 holes type US2, 3 holes type US3
To Next Page
Loading...
