6. The software license agreement appears in the [License Agreement] dialog box. After
reading through its contents, click [Yes].
7. Click [Full install] or [Custom install].
[Full install] installs all required applications: DeskTopBinder Lite and SmartDeviceMonitor for
Client.
[Custom install] installs selected applications.
8. Follow the instructions on the display and then click [Next >] to proceed to the next step.
9. After the installation is completed, select one of the options to restart the computer either
now or later, and click [Complete].
Restart the computer to complete installation.
• To stop installation of the selected software, click [Cancel] before installation is complete.
• Auto
Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PCL printer driver (TCP/IP)
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
4. Click [PCL Printer Driver].
5. The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
The PCL6 printer driver is installed in the language specified by your operating system.
7. Click [Next >].
8. Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
9. Double-click the printer name to display the printer settings.
The
details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer
model, and port.
10. Click [Port], and then click [Add].
11. Click [SmartDeviceMonitor], and then click [OK].
1. Preparing the Machine
16
To Next Page
Loading...
