If Error Occurs with the Specified Paper Size and
Type
This section gives instructions for operating the machine when there is no tray for the selected paper size
or type, or when paper loaded in the machine has run out.
• The tray cannot be changed if the following functions are set:
•
Duplex Print to a tray that does not support duplex printing
• If form feed is selected for a tray with the following settings, you can change the tray by canceling
the settings:
•
Duplex print
• If Auto Continue is selected, form feed paper is printed after a set interval. See "System".
• p.111 "System"
Printing from a Selected Tray
If the printer does not have a tray for the selected paper size or paper type, or if the selected paper loaded
in the printer has run out, a caution message appears. If this message appears, do the following procedure.
1. When the caution message appears, press [FormFeed].
A confirmation message appears.
2. Press the [OK] key.
If Error Occurs with the Specified Paper Size and Type
67
To Next Page
Loading...
