Printing on Orientation-Fixed or Two-Sided
Paper
This section explains how to print on paper whose orientation and printing side are unchangeable
(letterhead paper, for example).
Use the settings and paper orientations shown below to ensure the machine prints onto orientation-fixed
paper (such as letterhead or continuous stationery) correctly. Specify [Auto Detect] or [On (Always)] for
[Letterhead Setting] in the printer settings, and then place the original and paper as shown below. For
details about the letterhead print settings, see "System".
Paper Orientation
Paper Trays 1-3 Multi Bypass tray
Letterhead Setting
[On(Always)]
Letterhead Setting
[Off]
Letterhead Setting
[On(Always)]
Letterhead Setting
[Off]
1-sided print
2-sided print
1-sided print
2-sided print
• To print on letterhead paper when [Letterhead Setting] is set to [Auto], you must specify [Letterhead]
as the paper type in the PCL printer driver's settings.
• If
you change from 1-sided to 2-sided (duplex) printing during a copy job, all pages printed after the
change will be 2-sided. If you want to print the remaining sets as 1-sided, specify a paper tray that
is not available for duplex printing.
• For details about how to make 2-sided prints, see "Printing on both sides of sheets".
Printing on Orientation-Fixed or Two-Sided Paper
55
To Next Page
Loading...
