Setting Paper on the Bypass Tray
This section gives instructions for setting paper on the bypass tray.
For details about paper size and paper type, see "Paper Size and Paper Type", About This Machine.
• Paper sizes that can be loaded onto the bypass tray are 90-216 mm (3.55-8.50 in.) vertical, and
139-600 mm (5.48-23.62 in.) horizontal.
• When
paper larger than 600 mm (23.62 in.) in length is used, the paper may become wrinkled, may
not be fed into the machine, or may cause paper jams.
• If you want to use the bypass tray, be sure to specify the paper size and paper type.
• The following functions are disabled when printing from the bypass tray:
• Duplex printing
• Auto Tray Select
• Auto Tray Switching
• Certain types of OHP transparencies for color printing cannot be used. For details about types that
can be used, contact your sales or service representative.
1. Open the bypass tray.
Setting Paper on the Bypass Tray
41
To Next Page
Loading...
Need help?
General