• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin,
to at least 15 mm (0.6 in.) each.
• You cannot print envelopes with duplex function.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a pencil
or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
1. Open the bypass tray, and then insert the envelopes with the side you want to print face
down until the beeper sounds.
2. Press the [User Tools/Counter] key on the control panel.
3. Press the [ ] or [ ] key to select [System Settings], and then press the [OK] key.
Setting Paper on the Bypass Tray
51
To Next Page
Loading...
