8. Select the file you want to print using the [ ] or [ ] key, and then press [Print].
Enter the new number of sets using the scroll keys. You can enter up to 999 sets.
Press the [Escape] key to correct any entry mistakes.
9. Enter the number of copies to print, and then press [Print].
The remaining sets are printed.
Press [Cancel] to cancel printing.
• If the set quantity is changed when [User ID] is pressed in step 7, the changed quantity is applied to
all selected files.
•
When printing is completed, the stored file will be deleted.
• To stop printing after printing has started, press [JobReset]. The file will be deleted.
• For details about [User ID], see "Printing from the User ID Screen".
• p.94 "Printing from the User ID Screen".
Deleting Sample Print files
If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it
again until the settings are suitable.
1. Press [Prt.Jobs].
3. Printing Stored Documents
82
To Next Page
Loading...
