Parameter Setting
97
4
05 2, 1 Substitute the reception when the
machine cannot print (because all
paper trays have run out of paper,
toner is empty, or all paper trays
are out of order).
00: Enabled un-
conditionally
(Free)
01: Enabled
when Own
Name / Own
Fax Number is
received
11: Disabled
(Reception off)
05 5 Print sheet is limited to that which
has highest priority.
Off On
05 7 Empty tray alert (Paper Empty
Warning) even when one paper
tray is empty.
Off On
07 2 Parallel Memory Transmission Off On
08 2 Authorized Reception Type
Authorized RX is "ON"
Receiving from
only specified
senders
Receiving all
messages ex-
cept those from
specified send-
ers
10 3 Page reduction when printing Off On
10 6 Use both e-mail notification and
printed reports to confirm the
transmission results.
Off On
11 2 Detection of Blank Sheet Transmis-
sion
Off On
11 6 Local print when forwarding Off On
14 0 Print documents received with
Auto Power-On Reception (Night
Printing mode)
Immediate
printing (On)
When turning
on the operation
switch (Off)
14 1 Long Document Transmission
(Well Log)
Off On
14 3 Reset when function changed Off On
15 0, 1, 2 Select an available paper feed tray 001: Tray 1
010: Tray 2
011: Tray 3
100: Tray 4
15 5 Select the specified paper feed tray Off On
17 2 Whether you need to press [Add
Dest] after entering a Quick Di-
al/Group Dial when broadcasting.
Not necessary Necessary
17 3 Whether or not to reset the settings
when original is scanned.
On Off
Switch Bit Item 0 1
To Next Page
Loading...
