Program Special Sender
111
4
Authorized RX (Authorized Reception)
Specify when programming a Special Sender.
A Select [Authorized RX] using {U} or {T}, and then press the {OK} key.
B Select [On] or [Off] using {U} or {T}, and then press the {OK} key.
Forwarding
Specify when programming a Special Sender.
Important
❒ One forward destination can be registered for each Special Sender. To register
two or more forward destinations, use group destinations. Up to 100 destina-
tions can be specified in a group. However, when adding a group to another
group, a maximum of 150 destinations can be specified in a group.
A Select [Forwarding] using {U} or {T}, and then press the {OK} key.
B Select [On] or [Off] using {U} or {T}, and then press the {OK} key.
Selecting [Same as Basic Settings] will result in the same setting made for [For-
warding] under [Administrator Tools].
If you select [Off], the display returns to that of step
A
.
To Next Page
Loading...
