To Next PageTo Next PageWhat to do if the display is off on Ricoh Aficio MP 5002?
If the display is off on your Ricoh All in One Printer, the machine is either in Low Power mode or Sleep mode. To cancel Low Power mode, touch the display panel or press one of the keys on the control panel. To cancel Sleep mode, press the [Energy Saver] key or the [Check Status] key.
Why does the lamp remain lit on Ricoh Aficio MP 5002?
The lamp on your Ricoh All in One Printer may remain lit, preventing the machine from entering Sleep mode, if: * The ADF is open. Close the ADF. * The machine is communicating with external equipment. Check if the machine is communicating with external equipment. * The hard disk is active. Wait a little longer.
What does it mean when 'Turn main Power Switch off' appears on Ricoh All in One Printer?
The message 'Turn main Power Switch off' on your Ricoh All in One Printer means that the machine did not shut down normally when the main power switch was turned off and then immediately turned on again. Turn off the machine, wait for ten seconds or more after shutting it down, and then turn it on again.
Why does 'Shutting down... Please wait. Main power will be turned off automatically.' appear on Ricoh Aficio MP 5002 All in One Printer?
The message 'Shutting down... Please wait. Main power will be turned off automatically.' appears on your Ricoh All in One Printer because the shut down procedure has begun because the main power switch was turned off while the machine was in standby mode or performing an operation. Follow the message that appears and wait until the machine has shut down. Do not turn on the main power switch while this message is displayed.
What to do if nothing happens when I press [Check Status] or [Energy Saver] key on Ricoh Aficio MP 5002 All in One Printer?
If nothing happens when you press the [Check Status] key or the [Energy Saver] key on your Ricoh All in One Printer, the main power switch is turned off. Turn on the main power switch.
Why does 'Home is in use by another function.' appear on Ricoh Aficio MP 5002?
The message 'Home is in use by another function.' on your Ricoh All in One Printer appears because the [Home] screen is being edited by another function. Wait for a while, and then try to create the shortcut on the [Home] screen again.
General| Print Speed | 50 ppm |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Copy Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Functions | Print, Copy, Scan, Fax |
| Maximum Paper Size | A3 |
| Warm-up Time | 20 seconds |
| Memory (Standard) | 1 GB |
| Hard Disk Drive | 160 GB |
| Power Source | 220 - 240 V, 50/60 Hz |
| Fax Resolution | 200 x 200 dpi |
| Scan Resolution | 600 dpi |
| Connectivity | USB, Ethernet |
| Memory (Maximum) | 1.5 GB RAM |
| PDL (Page Description Language) | PCL6, PostScript 3, PDF |
| Copy Speed | 50 cpm |
| Network Connectivity | Ethernet 10/100Base-TX |
| Operating System Compatibility | Windows, Mac |
