Changing/Confirming Communication Information
196
4
Print Journal
You can print the Journal manually.
Important
❒ The contents of a Journal printed automatically are deleted after printing.
Keep the journal if you require a record of transmissions and receptions.
Printing the Journal
To print the Journal manually, select the printing method: “All”, “Print per File
No.”, or “Print per User”.
Note
❒ You can set whether the Journal is automatically printed after every 50 com-
munications in User Parameters (switch 03, bit 7) in the Facsimile Features
menu.
❒ You can display a sender name with the User Parameters (switch 04, bit 5) in
the Facsimile Features menu.
❒ Depending on security settings, the Journal is not automatically printed.
❒ If the optional extra G3 interface unit is installed, you can set whether the
Journal is printed by line type with the User Parameters (switch 19, bit 1) in
the Facsimile Features menu.
❒ You can program one of the Quick Operation keys with operations for this
function. Using the key allows you to omit the step where you press [Change
TX / Info].
❒ Depending on security settings, the destination may not appear.
❒ For the maximum number of communication results printed in the Journal,
see “Maximum Values”.
Reference
p.276 “Maximum Values”
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
