Changing/Confirming Communication Information
208
4
D Enter a 4-digit Memory Lock ID with the number keys, and then press the
{Start} key.
If you make a mistake, press [Clear] or the {Clear/Stop} key, and then try again.
To cancel printing, press [Cancel].
If the Memory Lock ID does not match, the “
Specified code does not
correspond to programmed Memory Lock ID.
” message appears. Press
[Exit] and retry after checking the Memory Lock ID.
E Press [Exit].
The standby display appears.
Note
❒ If Memory Lock Reception and received document storage are both set to
on, Memory Lock Reception is unavailable and received documents be-
come stored documents.
❒ Even when Memory Lock Reception is available, if free memory is insuffi-
cient, reception is not possible.
❒ You can also apply a Memory Lock Reception to documents that come
only from certain senders.
❒ Documents received by SEP Code Reception are automatically printed
even if this function is switched on.
❒ You can program one of the Quick Operation keys with operations for this
function. Using the key allows you to omit step
B
.
❒ If you print a Memory Lock File, it is deleted.
Reference
p.204 “Printing/Deleting Received and Stored Documents (Print/Delete
Stored Reception File)”
“Facsimile Features”, General Settings Guide
“Troubleshooting When Using the Facsimile Function”, Troubleshooting
To Next Page
Loading...
Need help?
General
