Using PostScript 3
78
3
I Select the file you want to print by pressing it.
J Press [Print].
The password screen appears.
K Enter the password using the number keys, and then press [OK].
A confirmation screen appears.
A confirmation screen will appear if the password is not entered correctly.
Press [OK] to enter the password again.
When multiple print files are selected, the machine prints only files that cor-
respond to the entered password. The number of files is displayed on the con-
firmation screen.
L Press [Yes].
The locked file is printed.
Note
❒ Press [Stop] to cancel printing.
❒ To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started,
the file is deleted.
Deleting a Locked Print File
If a printed document is not as required, you can delete the Locked Print file.
A
On the machine's control panel, press the
{
Printer
}
key to display the printer screen.
B Press [Print Jobs].
A list of print files stored in the machine appears.
C Press [Locked Print Job List].
A list of locked print files stored in the machine appears.
D Select the file you want to delete by pressing it.
To cancel a selection, press the highlighted job again.
Only one file can be selected at a time.
E Press [Delete].
A password screen appears.
F Enter the password using the number keys, and then press [OK].
A confirmation screen appears.
A confirmation screen will reappear if the password was entered incorrectly.
Press [OK] to enter the password again.
When multiple files are selected, the machine deletes only files that corre-
spond to the entered password. The number of files to be deleted is displayed
on the confirmation screen.
To Next Page
Loading...
Need help?
General
