15/06/2012 MP6002/7502/9002 Technical Launch Information
35
7. INSTALLATION
7.1 GENERAL
All products and options must be installed by recognised Ricoh trained service technicians
in accordance with the procedures in the Product Service Manual (Section 1).
7.2 MINIMUM SPACE REQUIREMENTS
CAUTION
The MP 6002/6002SP/7502/7502SP/9002/9002SP
exceeds the width of a standard (762mm/30”) doorway
Place the copier near the power source, providing clearance as shown below. The same
amount of clearance is necessary when optional equipment is installed.
To Next Page
Loading...
