*3
Select the paper size under Tray Paper Size: Tray 1 4 in System Settings. See “System Settings”, Network and
System Settings Reference .
*4
Press [Bypass], and the [ ] key, and then enter the paper size using the number keys.
*5
For details about loading envelopes, see “Envelopes”.
*6
When loading envelopes, make sure the stack height does not exceed the limit mark of the paper tray. (Do not
press on the stack of envelopes while determining if the stack exceeds the maximum height.)
*7
It is recommended to place one sheet at a time.
*8
Press [Bypass], and the [ ] key, and then select the paper size.
Paper Thickness
Paper Thickness
*1
Paper weight
Thin Paper 52 59 g/m
2
(14 16 lb. Bond)
Plain Paper 1 60 74 g/m
2
(16 20 lb. Bond)
Plain Paper 2 75 81 g/m
2
(20 lb. Bond)
Middle Thick 82 105 g/m
2
(20 28 lb. Bond)
Thick Paper 1 106 169 g/m
2
(28 lb. Bond 90 lb. Index)
Thick Paper 2 170 210 g/m
2
(65 lb. Cover 54 lb. Bond)
Thick Paper 3 211 256 g/m
2
(80 lb. Cover 140 lb. Index)
*1
Print quality will decrease if the paper you are using is close to the minimum or maximum weight. Change
the paper weight setting to thinner or thicker.
• When loading paper in trays 1 2, and the lower paper trays, place the print side face up. When
loading paper in the bypass tray, place the print side face down.
• When using translucent paper or label paper, make sure to select the appropriate paper type under
Paper Type: Bypass Tray. See “System Settings”, Network and System Settings Reference .
• When you use the bypass tray, it is recommended to set the paper direction to .
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when
delivered.)
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,
or a misfeed might occur. For details, see Copy and Document Server Reference , and Printer
Reference .
• When you use OHP transparencies, fan them for each use.
3. Adding Paper
96
To Next Page
Loading...
Need help?
General
