Facsimile Features
178
4
K Specify End Receivers with destination keys, and then press [OK].
You can change the display to the fax destination, Internet fax destination,
and IP-Fax destination using the key on the left side of the display.
A reception station can also be registered as a group destination. In such a
case, a maximum of 500 parties including End Receivers 1-5 can be specified
in a group.
To register another End Receiver, repeat from step
J
.
L To program a password, press [Password].
If you do not want to program a password, proceed to step
O
.
M Enter a password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
N Re-enter the password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
To change the password after pressing [OK], press [Change] and repeat steps
M
and
N
, or press [Cancel] and repeat from step
L
.
O Press [OK] twice.
P Press [Exit].
Q Press the {User Tools/Counter} key.
To Next Page
Loading...
