Ricoh Aficio MP C3000 Printer Reference

Installing the Printer Driver
27
1
Windows XP, Windows Server 2003:
A Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
B Click the icon of the machine you want to use. On the [File] menu, click
[Properties]. The printer properties appear.
C Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
Note
❒ For TCP/IP, timeout setting can be configured.
❒ User, proxy, and timeout settings can be configured for IPP.
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow the
procedure below.
A Click [Cancel] to close the [Port Configuration:] dialog box.
B Start SmartDeviceMonitor for Client, and then right-click the SmartDe-
viceMonitor for Client icon on the tasktray.
C Point to [Properties], and then click [Extended Features Settings].
D Select the [Set Recovery/Parallel Printing for each port] check box.
E Click [OK] to close the [Extended Features Settings] dialog box.
Reference
For information about these settings, see “Using SmartDeviceMonitor for
Client”, Network Guide, or SmartDeviceMonitor for Client Help.

Ricoh Aficio MP C3000 Specifications

General

Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Duplex	Standard
Scan to	Email, Folder, USB
Fax	Optional
Modem Speed (Fax)	33.6 Kbps
Hard Disk Drive	40 GB
Print Speed	30 ppm
Type	Digital Color Copier
Functions	Copy, Print, Scan
Original Size	Up to 11" x 17"
Paper Size	A5 to A3
Paper Weight	52 to 256 g/m²
Document Feeder	50 sheets
Scan Resolution	600 dpi
Memory (Standard)	768 MB RAM
Power Requirements	120V, 60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS
First Copy Time	6.5 seconds or less
Scan Speed	41 images per minute