Ricoh Aficio MP C3000 Printer Reference

Preparing the Machine
52
1
Printing with Bluetooth Connection
This describes how to print using with Bluetooth devices.
Supported Profiles
Refer the following supported profiles for Bluetooth connection.
❖ SPP, HCRP
• A maximum of two Bluetooth adaptor or Bluetooth-equipped computers
can be connected at the same time using the Bluetooth interface: one by
SPP, one by HCRP.
• When connecting more than one Bluetooth adaptor or Bluetooth-equipped
computer at the same time, the first device that establishes connection is se-
lected. When selecting the connection between the other devices, cancel
the first established connection.
• SPP connection does not support bidirectional communications.
• HCRP connection supports bidirectional communications.
❖ BIP
• For BIP connection, a module including PostScript 3 must be installed in
the machine.
• Only one Bluetooth adaptor or Bluetooth-equipped computer can be con-
nected via BIP.
• Only JPEG images that can be printed using BIP.
• User codes are disabled for BIP.
You cannot print if print functions are restricted.
• Some printers do not support BIP.
Note
❒ In this manual, the instruction referred to print using SPP. To print using
HCRP or BIP, see the Help supplied with the Bluetooth adapter you use.

Ricoh Aficio MP C3000 Specifications

General

Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Duplex	Standard
Scan to	Email, Folder, USB
Fax	Optional
Modem Speed (Fax)	33.6 Kbps
Hard Disk Drive	40 GB
Print Speed	30 ppm
Type	Digital Color Copier
Functions	Copy, Print, Scan
Original Size	Up to 11" x 17"
Paper Size	A5 to A3
Paper Weight	52 to 256 g/m²
Document Feeder	50 sheets
Scan Resolution	600 dpi
Memory (Standard)	768 MB RAM
Power Requirements	120V, 60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS
First Copy Time	6.5 seconds or less
Scan Speed	41 images per minute