Ricoh Aficio MP C3000 Printer Reference

Installing the Printer Driver
35
1
N Check that the port of the selected printer is displayed in [Port:].
O Configure the default printer as necessary.
P Click [Continue].
The printer driver installation starts.
Q After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See “When a
Message Appears during Installation of the Printer Driver”, Trouble
Shooting.

Ricoh Aficio MP C3000 Specifications

General

Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Duplex	Standard
Scan to	Email, Folder, USB
Fax	Optional
Modem Speed (Fax)	33.6 Kbps
Hard Disk Drive	40 GB
Print Speed	30 ppm
Type	Digital Color Copier
Functions	Copy, Print, Scan
Original Size	Up to 11" x 17"
Paper Size	A5 to A3
Paper Weight	52 to 256 g/m²
Document Feeder	50 sheets
Scan Resolution	600 dpi
Memory (Standard)	768 MB RAM
Power Requirements	120V, 60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS
First Copy Time	6.5 seconds or less
Scan Speed	41 images per minute