Ricoh Aficio MP C3000 Printer Reference

Other Print Operations
90
3
Printing a Sample Print File
The following procedure describes how to print a Sample Print file with the PCL
6 / 5c and the RPCS printer driver. For information about how to print a Sample
Print file with the PostScript 3 printer driver, see PostScript 3 Supplement in-
cluded as a PDF file on the CD-ROM.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
❒ If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this
function.
A Configure Sample Print in the printer driver's properties.
For details about configuring the printer drivers, see the relevant Help files.
B Start printing from the application's [Print] dialog box.
Make sure to set more than two copies.
The Sample Print job is sent to the machine, and the first set is printed.
C On the machine's control panel, press the {Printer} key to display the Printer
screen.
D Press [Print Jobs].
A list of print files stored in the machine appears.
E Press[Sample Print Job List].
A list of Sample Print files stored in the machine appears.
Depending on the security settings, certain print jobs may not be displayed.

Ricoh Aficio MP C3000 Specifications

General

Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Duplex	Standard
Scan to	Email, Folder, USB
Fax	Optional
Modem Speed (Fax)	33.6 Kbps
Hard Disk Drive	40 GB
Print Speed	30 ppm
Type	Digital Color Copier
Functions	Copy, Print, Scan
Original Size	Up to 11" x 17"
Paper Size	A5 to A3
Paper Weight	52 to 256 g/m²
Document Feeder	50 sheets
Scan Resolution	600 dpi
Memory (Standard)	768 MB RAM
Power Requirements	120V, 60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS
First Copy Time	6.5 seconds or less
Scan Speed	41 images per minute