Message Causes Solutions
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."
The hard disk became full
after a file was stored.
Delete the files stored in the Document
Server or reduce the file size to be sent.
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
files."
The maximum file capacity
of the Document Server was
exceeded.
Delete the files stored in the Document
Server.
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
pages per file."
The maximum page
capacity of the Document
Server was exceeded.
Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send.
"The selected paper type is
not supported. This job has
been cancelled."
Job reset is automatically
performed if the specified
paper type is incorrect.
Specify the correct paper type, and then
print the file again.
"You do not have a
privilege to use this function.
This job has been
cancelled."
The entered login user name
or login password is not
correct.
Check that the user name and password
are correct.
"You do not have a
privilege to use this function.
This job has been
cancelled."
The logged in user is not
allowed to use the selected
function.
For details about how to set
permissions, see Security Guide .
"You do not have a
privilege to use this function.
This operation has been
cancelled."
The logged in user does not
have the privileges to
register programs or
change the paper tray
settings.
For details about how to set
permissions, see Security Guide .
10. Troubleshooting
210
To Next Page
Loading...
Need help?
General
