Ricoh Aficio MP C3502 User Manual

1. Press the [Home] key on the top left of the control panel, and press the [Document Server]
icon on the [Home] screen.
CJS113
2. Press [To Scanning Screen].
3. Press [User Name].
4. Specify a user name, and then press [OK].
The user names shown are names that were registered in the Address Book. To specify a name not
shown in the screen, press [Manual Entry], and then enter a user name.
5. Press [File Name].
6. Enter a file name, and then press [OK].
7. Press [Password].
8. Enter a password with the number keys, and then press [OK].
You can use four to eight digits for the password.
9. For double-check, enter the password again, and then press [OK].
10. Place the original.
11. Specify the original scanning conditions.
12. Press the [Start] key.
The original is scanned. The document is saved in the Document Server.
After scanning, a list of stored documents will be displayed. If the list does not appear, press [Finish
Scanning].
7. Document Server
128

Ricoh Aficio MP C3502 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Standard Paper Capacity	1, 200 sheets
Max Paper Capacity	4, 400 sheets
Connectivity	USB 2.0, Ethernet
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	600 dpi