Ricoh Aficio MP C3502 User Manual

2. Press [Cancel Scanning] or [Cancel TX].
Depending on the transmission mode and function you use, either [Cancel Scanning] or [Cancel
TX] is displayed.
Canceling a Transmission After the Original Is Scanned
Use this procedure to cancel a transmission after the original is scanned.
You can cancel transmission of a file while the file is being sent, stored in memory, or if it fails to transmit.
All the scanned data is deleted from memory.
1. Press the [Stop] key.
CJN024
You can also press [TX/RX Status / Print], and then [Check / Stop Transmission File].
2. Press [Standby File List].
To cancel transmission of a file stored in the memory, press the [File List] tab.
3. Select the file you want to cancel.
If the desired file is not shown, press [ ] or [ ] to find it.
4. Press [Stop Transmission].
To cancel another file, repeat steps 3 through 4.
5. Press [OK].
6. Press [Exit].
After pressing [Check / Stop Transmission File] under [TX/RX Status / Print] in step 1, press [Exit]
twice.
Canceling a Transmission
95

Ricoh Aficio MP C3502 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Standard Paper Capacity	1, 200 sheets
Max Paper Capacity	4, 400 sheets
Connectivity	USB 2.0, Ethernet
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	600 dpi