Message Causes Solutions
"Original(s) is being
scanned for a different
function."
A function of the machine
other than the Copier function
is being used such as the
Document Server function.
Cancel the job that is being
processed. For example, press [Exit],
and then press the [Home] key. Next,
press the [Document Server] icon on
the [Home] screen, and then press the
[Stop] key. When the message "The
Stop key has been pressed,
scanning, and also other print jobs
that were being processed and which
could be stopped, have been
suspended. To continue scanning and
printing press [Continue], to cancel
scanning press [Cancel Scanning]. To
delete other suspended jobs press
[Job List]." appears, press [Cancel
Scanning].
"Please wait." The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears.
Do not switch off the power while this
message is displayed. Depending on
the number of destinations to be
updated, there may be some delay
before you can resume operation.
Operations are not possible while this
message is displayed.
"Rotate Sort is not available
with this paper size."
A size of paper for which
Rotate Sort is not available is
selected.
Select a proper paper size. For
details about paper, see "Sort",
Copy/ Document Server .
"Stapling capacity
exceeded."
The number of sheets per set is
over the staple capacity.
Check the stapler capacity. For
details about the stapler capacity, see
"Specifications for Finisher SR3070",
"Specifications for Booklet Finisher
SR3100", "Specifications for Finisher
SR3090", "Specifications for Finisher
SR3120", or "Specifications for
Booklet Finisher SR3110",
Maintenance and Specifications .
When Messages Are Displayed on the Control Panel
179
To Next Page
Loading...
Need help?
General
