Ricoh Aficio MP C3502 User Manual

Message Causes Solutions
"Scanner is in use for other
function. Please wait."
A function of the machine
other than the Scanner
function is being used such
as the Copier function.
• Wait for a while, and then
reconnect.
• Cancel the job that is being
processed. For example, press
[Exit], and then press the [Home]
key. Next, press the [Copier] icon
on the [Home] screen, and then
press the [Stop] key. When the
message "The Stop key has been
pressed, copying, and also other
print jobs that were being
processed and which could be
stopped, have been suspended.
To continue copying and printing
press [Continue], to cancel
copying press [Cancel Copying].
To delete other suspended jobs
press [Job List]." appears, press
[Cancel Copying].
"Scanner is not available on
the specified device."
The TWAIN scanner function
cannot be used on this
machine.
Contact your service representative.
"Scanner is not available.
Check the scanner
connection status."
The machine's main power
switch is off.
Turn on the main power switch.
10. Troubleshooting
230

Ricoh Aficio MP C3502 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Standard Paper Capacity	1, 200 sheets
Max Paper Capacity	4, 400 sheets
Connectivity	USB 2.0, Ethernet
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	600 dpi