Protection Using Encryption
145
5
Enabling SSL
After installing the server certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
A Open a Web Image Monitor.
B Enter "http://(machine's-address)/" in the address bar to access the printer.
C Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
D Click [Configuration], under [Security], click [SSL/TLS].
The [SSL/TLS] page appears.
E Click [Enable] for [SSL/TLS].
F Click [OK].
The SSL setting is enabled.
G Log off from the machine.
Note
❒ If you set [Permit SSL/TLS Communication] to [Ciphertext Only], enter "ht-
tps://(machine's address)/" to access the machine.
ApollonC1-GB_Sec_F_FM_forPaper.book Page 145 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
