General Features
37
2
❖ Original Feed Delay 1
Specify the duration of delay before an original is fed into the machine after
being set. If originals frequently feed in slanted, or you are using special orig-
inals, set the delay accordingly.
The default setting is 1 second(s).
The time can be set from 0 to 5 seconds.
❖ Original Feed Delay 2
Specify the duration of the pause immediately after originals are first fed into
the machine. If originals frequently feed in slanted, or you are using special
originals, set the delay accordingly.
The default setting is 1 second(s).
The time can be set from 1 to 5 seconds.
❖ Feed Start Method
Specify whether feeding starts automatically or after pressing the {Start} Key.
The default setting is Auto.
❖ Fine Ratio Adjustment: Copier
Depending on paper type, environment, and humidity, copy paper can ex-
pand or shrink slightly. This means that the size of the copy and the original
do not match. if this happens, specify the vertical and horizontal correction
ratio. You can specify this setting for each paper type (plain, translucent, film
and recycled paper)
The default setting is Vertical: 0.0% / Horizontal: 0.0%.
Specify the ratio between –1.0% and 1.0% (in 0.1% increments)
ABB009S
To Next Page
Loading...
