Registering Addresses and Users for Scanner Functions
172
6
Registering SMTP and LDAP Authentication
This section describes how to register SMTP and LDAP Authentication.
SMTP Authentication
This section describes how to register SMTP Authentication.
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an SMTP server.
To use an SMTP server, you need to program it beforehand.
Important
❒ When [Do not Specify] is selected for SMTP Authentication, the User Name and
Password that you have specified in SMTP Authentication of File Transfer
settings applies. For details, see "File Transfer".
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Press the name you want to register or enter the registered number using
the number keys
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F Press [Auth. Info].
G Press [Specify Other Auth. Info] on the right side of SMTP Authentication.
To Next Page
Loading...
