Authentication Information
123
6
Registering a User Code
This section describes how to register a user code.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Press the name whose code is to be registered, or enter the registered num-
ber using the number key.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F Press [Auth. Info].
G Enter the user code using the number keys, and then press the {q} key.
If you make a mistake, press [Clear] or the {Clear/Stop} key.
H Press [TNext] twice.
To Next Page
Loading...
