Supervisor Operations
175
8
Resetting an Administrator’s Password
Preparation
For details about logging on and logging off as the supervisor, see p.172 “Log-
ging on as the Supervisor”, p.173 “Logging off as the Supervisor”.
A Press the {Login/Logout} key.
B Log on as the supervisor.
You can log on in the same way as an administrator.
C Press [System Settings].
D Press [Administrator Tools].
E Press [Program / Change Administrator].
F Press [Change] for the administrator you wish to reset.
G Press [Change] for the login password.
H Enter the login password, and then press [OK].
I If a password reentry screen appears, enter the login password, and then press [OK].
J Press [OK].
K Press [OK].
L Press the {User Tools/Counter} key.
AQI007S
To Next Page
Loading...
