File Transfer
57
2
❖ Default User Name / Password (Send)
Specify the user name and password required when sending scan files direct-
ly to a shared folder on a computer running Windows, to an FTP server, or to
a NetWare server.
Enter in up to 64 characters.
❖ Program / Change / Delete E-mail Message
You can program, change, or delete the e-mail message used when sending a
scan file as an attachment.
Program / Change:
A Press [System Settings].
B Press [File Transfer].
C Press [Program / Change / Delete E-mail Message].
D Check that [Program / Change] is selected.
E Press [Not Programmed].
F Press [Change].
G Enter a name, and then press [OK].
Enter the name using up to 20 characters.
H Press [Edit].
To start a new line, press [OK] to return to the e-mail message screen, and
then press [TNext] in "Select Line to Edit:".
I Enter the text, and then press [OK].
Enter up to five lines of text. Each line can consist of up to 80 characters.
J Press [OK].
K Press [Exit].
L Press the {User Tools/Counter} key.
Delete:
A Press [System Settings].
B Press [File Transfer].
C Press [Program / Change / Delete E-mail Message].
D Press [Delete].
E Select the e-mail message to delete.
The confirmation message about deleting appears.
F Press [Yes].
To Next Page
Loading...
