Printer Features
102
4
❖ Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority,
according to paper size or resolution.
The default setting is Frame Priority.
• Font Priority
This setting uses memory for registering fonts.
•Frame Priority
This setting uses frame memory for high speed printing.
❖ Copies
You can specify the number of print sets. This setting is disabled if the num-
ber of pages to print has been specified with the printer driver or another
command.
The default setting is 1.
The number of copies can be specified from 1 to 999 by increments of one.
❖ Blank Page Print
You can select whether or not to print blank pages.
The default setting is On.
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside the printable area.
• There are only blank characters.
❖ Reserved Job Waiting Time
You can specify how long the machine waits to receive a print job before al-
lowing other functions such as the copier and scanner functions to interrupt
it.
The default setting is Short Wait.
❖ Printer Language
Specify the printer language.
The default setting is Auto.
This menu appears only when the PostScript 3 unit is installed.
❖ Sub Paper Size
You can enable the Auto Substitute Paper Size (A4, LT) feature.
The default setting is Off.
❖ Bypass Tray Setting Priority
Specify whether (Printer) Driver / Command or Machine Settings, has prior-
ity for determining the paper size for the bypass tray.
The default setting is Driver / Command.
❖ Edge to Edge Print
You can select whether or not to print on the entire sheet.
The default setting is Off.
The 5 mm margin along the edges may not be printed properly.
To Next Page
Loading...
