Registering Addresses and Users for Scanner Functions
142
6
Changing a SMB Folder
This section describes how to change settings of the registered SMB folder.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose folder you want to change.
Press the name key, or enter the registered number using the number keys.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F Press [Folder].
G Select the items you want to change.
H Press [Connection Test] to check the path is set correctly.
I Press [Exit].
J Press the {User Tools/Counter} key.
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
❒ If the connection test fails, check the settings, and then try again.
Reference
p.120 “Changing a Registered Name”
p.143 “Changing the registered SMB folder”
p.143 “To change the protocol”
To Next Page
Loading...
