Getting Started
20
1
❖ Rear
1. Upper output guide
Takes delivered paper to the upper out-
put stacker.
2. Original exit switching lever
Takes originals to the original output
guide, and switches delivery to the rear
output.
3. Original exit
Originals are delivered here.
4. Ventilation holes
Prevent overheating.
5.
Anti-humidity heater switch (optional)
When humidity is high, paper in the pa-
per roll or cut paper trays may absorb
moisture, which can affect image quality.
The anti-humidity heater prevents this.
Turn this switch on when humidity is
high.
6. Upper output exit
When the upper output is selected, out-
put paper is delivered here with the print
side facing the user.
7. Original output guide
Stacks originals delivered to the rear output.
8. Lower output exit
When the lower output is selected, out-
put paper is delivered here with the print
side up.
9. Lower output guides
Prevent delivered paper being stacked at
an angle when the lower output is selected.
10. Lower output tray (optional)
Delivers paper from the lower output ex-
it, and then sends them to the lower out-
put stacker.
ATZ011S
To Next Page
Loading...
