User Authentication
41
2
I Press [Change].
J Specify the range in which [Simple (Limitation)] is applied to Printer Job Au-
thentication.
You can specify the IPv4 address range to which this setting is applied, and
whether or not to apply the setting to the parallel and USB interfaces.
K Press [Exit].
L Press [OK].
M Press the {User Tools/Counter} key.
Authentication Information Stored in the Address Book
This can be specified by the user administrator.
If you have specified [User Authentication], you can specify access limits for indi-
vidual users and groups of users. Specify the setting in the address book for each
user.
User authentication can also be specified via SmartDeviceMonitor for Admin or
Web Image Monitor.
Preparation
For details about logging on and logging off with administrator authentica-
tion, see p.25 “Logging on Using Administrator Authentication”, p.28 “Log-
ging off Using Administrator Authentication”.
You need to register a user in the address book. For details about the address
book, see General Settings Guide.
See p.125 “Limiting Available Functions”.
To Next Page
Loading...
