Authentication and its Application
60
2
I Press [Change].
J Specify the range in which [Simple (Limitation)] is applied to Printer Job Au-
thentication.
You can specify the IPv4 address range to which this setting is applied, and
whether or not to apply the setting to the parallel and USB interfaces.
K Press [Exit].
L Select which of the machine’s functions you want to permit.
LDAP Authentication will be applied to the selected functions.
Authentication will be applied to the selected functions.
For details about “Limiting Available Functions”, see p.125 “Limiting Avail-
able Functions”.
Limitation
❒ If Printer Controller RW-3600 is installed, [Printer] will not be accepted.
To Next Page
Loading...
