Specifying the Extended Security Functions
158
6
❖ Authenticate Current Job
This can be specified by the machine administrator.
This setting lets you specify whether or not authentication is required for op-
erations such as canceling jobs under the copier and printer functions.
If you select [Login Privilege], authorized users and the machine administrator
can operate the machine. When this is selected, authentication is not required
for users who logged on to the machine before [Login Privilege] was selected.
If you select [Access Privilege], users who canceled a copy or print job in
progress and the machine administrator can operate the machine.
Limitation
❒ Even if you select [Login Privilege] and log onto the machine, you cannot
cancel a copy or print job in progress if you are not authorized to use the
copy and printer functions.
❒ You can specify [Authenticate Current Job] only if [User Authentication Manage-
ment] was specified.
• Login Privilege
• Access Privilege
•Off
Note
❒ Default: Off
❖ Password Policy
This can be specified by the user administrator.
The password policy setting is effective only if [Basic Auth.] is specified.
This setting lets you specify [Complexity Setting] and [Minimum Character No.] for
the password. By making this setting, you can limit the available passwords
to only those that meet the conditions specified in [Complexity Setting] and [Min-
imum Character No.].
If you select [Level 1], specify the password using a combination of two types
of characters selected from upper-case letters, lower-case letters, decimal
numbers, and symbols such as #.
If you select [Level 2], specify the password using a combination of three types
of characters selected from upper-case letters, lower-case letters, decimal
numbers, and symbols such as #.
• Level 1
• Level 2
•Off
• Minimum Character No.
Note
❒ Default: Off (0)
To Next Page
Loading...
