Why is the scanned image from my Ricoh All in One Printer upside down?
If the scanned image from your Ricoh All in One Printer is upside down, the original was likely placed upside down. Place the original in the correct orientation.
What to do if my Ricoh All in One Printer is not printing pages?
If your Ricoh All in One Printer isn't printing pages, try reconnecting the USB cable. Also, check that the front cover is open and the tray extension is pulled out.
Why does my Ricoh All in One Printer have frequent paper jams?
If paper jams occur frequently in your Ricoh All in One Printer, adjust the paper guides to eliminate any gaps between the paper and the guides. Avoid printing on both sides of the paper when printing images with large areas of solid color, as this consumes a lot of toner. Use supported types of paper and load paper only up to the upper limit markings on the paper guide.
Why is my Ricoh Aficio SP 100SF e All in One Printer feeding multiple sheets?
If your Ricoh All in One Printer is feeding multiple sheets of paper at once, fan the paper well before loading it. Ensure the paper guides are correctly positioned. Use supported paper types and do not load paper beyond the upper limit markings. Only add paper when the tray is empty.
Why is there a delay when printing with my Ricoh Aficio SP 100SF e All in One Printer?
If there is considerable delay between the print start command and actual printing with your Ricoh All in One Printer, note that processing time depends on data volume; large, graphics-heavy documents take longer. You can also reduce the printing resolution in the printer driver to speed up printing.
What to do if paper does not feed smoothly in Ricoh All in One Printer?
If paper does not feed smoothly in your Ricoh All in One Printer, use supported paper types. Load paper correctly, ensuring the paper guides are properly adjusted. If the paper is curled, straighten it. Take the paper out of the tray, fan it well, reverse the top and bottom of the paper, and put it back in the tray.
Why is the scanned image from my Ricoh All in One Printer blank?
If the scanned image from your Ricoh All in One Printer is blank, the original was likely placed with the front and back reversed.
Why is the scanned image from my Ricoh Aficio SP 100SF e All in One Printer distorted?
If the scanned image from your Ricoh All in One Printer is distorted or out of position, it is possible that the original was moved during scanning. Make sure that you do not move the original during scanning.
How to fix curled paper from Ricoh Aficio SP 100SF e All in One Printer?
If your Ricoh All in One Printer prints curled paper, try loading the paper upside down in the paper tray. If the paper is damp, use paper that has been stored properly.
How to fix images printed diagonally by Ricoh Aficio SP 100SF e All in One Printer?
If images are printed diagonally on the pages by your Ricoh All in One Printer, adjust the paper guides to eliminate any gaps between the paper and the guides.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 600 dpi |
| Connectivity | USB 2.0 |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Duplex Printing | Manual |
| Scanner Type | Flatbed |
| Fax Transmission Speed | 3 seconds per page |
| Supported Operating Systems | Windows |
Step-by-step guide on loading paper and setting paper type/size.
How to print, available settings, and duplex printing instructions.
Copier mode screen, basic copying, cancellation, and reduce/enlarge options.
Adjusting settings and updating firmware using the Smart Organizing Monitor.
Detailed procedure for replacing the toner cartridge.
Troubleshooting for common issues like power, paper jams, and print quality.
Step-by-step instructions for removing jams and resolving error messages.
To Next Page
