When you place the original in the ADF, all the pages are automatically scanned and then only the
pages on one side are copied sequentially. Proceed to Step 12.
When you place the original on the exposure glass, perform the following steps to scan the
subsequent pages.
11. When the current page is scanned, place the next page on the exposure glass, and then
press the [Start] key.
When [Sort] is disabled, the machine prints only the one sides of pages first.
When [Sort] is enabled, scan all the pages, and then press the [OK] key to start printing copies of
them.
12. Take out all of the prints from the output tray and place them in the input tray.
To print on the reverse side of the prints, turn them over so that the blank side faces up and place
them in the input tray.
Portrait
To Next Page
Loading...
